Custom bike fixture

3D build view for the four-slot charging rack

This viewer turns your sketch and lumber dimensions into an interactive Three.js rack model. You can keep it assembled for presentation, append the cut list for building, or explode the parts into grouped vertical columns.

Four-slot charging rack viewer

Orbit the darker warm-wood rack, reveal the perimeter and switch between canvas or corrugated canopy styles, or explode the assembly.

Top shelf

2x8 × 101 1/2" × 1

Floating end walls

2x8 × 29 3/4" × 2

Bottom rail

2x6 × 98 1/2" × 1

Outer slot pillars

2x2 × 29 1/4" × 4

Inner slot pillars

2x2 × 29 1/2" × 8

Cable cover boards

1x6 deck board × 98 1/2" × 2

Slot spacing jig

2x2 × 2 3/16" × 1

Drag to orbit • Scroll to zoom

Rack notes

Build-ready dimensions

Overall size

101.5" L × 31.75" H × 7.25" D

Bike slots

4 slots at 2 3/16" tire spacing

Perimeter option

10' × 6' 6x6 box, with 1.5" visible above grade

Electrical display

Weatherproof outlet box, buried cable, gravel interior, and synced charge lights

Cut list

Materials grouped by board size

19 pieces rendered

Click Show dimensions to append the build sheet and show parallel measuring lines with 1" ticks and 12" notches. Toggle Show perimeter box to preview the aligned timber frame with gravel interior, then switch between canvas poles or a timber-and-metal roof.

Assumptions used in the render

The 2x2 uprights are inset so their front and back faces stay flush with the 2x6 bottom rail.
The rack shifts onto the back perimeter beam when the perimeter option is enabled, and the perimeter interior changes to gravel while the outside remains grass.
The opening camera motion slowly sweeps a rounded box pattern until you first click or scroll.

Complete parts list

Structure, fasteners, and charging gear

Fastener quantities are marked Est. and should be field-verified.

Wood structure

1 × 2x8 × 101 1/2" top shelf
2 × 2x8 × 29 3/4" floating end walls
1 × 2x6 × 98 1/2" bottom rail
4 × 2x2 × 29 1/4" outer slot pillars
8 × 2x2 × 29 1/2" inner slot pillars
2 × 1x6 × 98 1/2" deck-board cable covers
1 × 2x2 × 2 3/16" spacing jig block
Optional perimeter: 2 × 6x6 × 10' and 2 × 6x6 × 6'
Optional canopy: 2 poles @ 8', 2 poles @ 7' 2", plus top frame rails

Wood fasteners

Est. 24 × 3 1/2" exterior structural screws for top shelf and end-wall joints
Est. 48 × 3" exterior deck screws for the bottom rail and major rack assembly
Est. 72 × 2 1/2" exterior deck screws for the 2x2 slot uprights
Est. 24 × 1 5/8" exterior screws for the 1x6 cable covers and plaque mounting
Est. 16 × 3 1/2" structural screws for the optional canopy posts and perimeter frame tie-ins
Est. 8 × 1 1/2" stainless pan-head screws for the weatherproof lockable outlet box

Electrical and cable management

4 charging units, one for each bike slot
1 outdoor-rated extension cord with a 6-outlet end
Est. 30 industrial hammer-in cable staples for routing under the top shelf
TEK90 15 amp burial cable, Est. site run length to panel plus underground code slack
2 aluminum adapter terminators to transition the TEK90 into the outlet box
1 weatherproof lockable outlet box mounted on the backside of the left end wall
1 black feeder cable shown dropping from the outlet box into the grass grade